Barco ScreenPRO-II User Manual page 216

6. Operations
Prerequisites
mêÉêÉèìáëáíÉë
Prior to using the ScreenPRO-II Controller system, please ensure the following:
•
•
•
216
All system inputs, backgrounds, the DSK and the LOGO are properly configured.
In Chapter 5, refer to the following sections for details:
~
" Input Setup " on page 206.
~
" Background Setup
~
" DSK Setup Procedure
~
" LOGO Setup Procedure
Ensure that you are familiar with all front panel controls. In Chapter 2, refer to the
" ScreenPRO-II Controller Front Panel
Ensure that you are familiar with all system menus, and in particular, the
operational menus. In Chapter 4, refer to the following sections for details:
~
Refer to the " PIP Adjustment Menu
all PIP adjustment menu items.
~
Refer to the " Key Menu
adjustment menu items.
~
Refer to the " Source Adjustment Menus
details on all input source adjustment parameters.
Tip As you review each function, it is recommended that you try
out (and practice) each feature at the ScreenPRO-II
Controller itself — using a fully configured system consisting
of Program and Preview monitors, projectors, and all the
necessary sources and backgrounds.
Note In this chapter, when a sequence of menu selections is
required to complete a given procedure, the " > " symbol is
used to divide each successive menu pick.
" on page 205.
" on page 211.
" on page 212.
" section on page 34 for details.
" section on page 148 for details on
" section on page 155 for details on all Key
" section on page 165 for
Example : To access the Genlock Menu , press
{ HOME } > { OUTPUT } > { GLCK }.
ScreenPRO-II Controller • User's Guide