Locking And Unlocking The Controller - Barco ScreenPRO-II User Manual

6. Operations

Locking and Unlocking the Controller

içÅâáåÖ=~åÇ=råäçÅâáåÖ=íÜÉ=`çåíêçääÉê
This section provides instructions for locking and unlocking the Controller.
Use the following steps to lock the Controller:
1.
2.
3.
Use the following steps to unlock the Controller:
1.
2.
252
Prerequisite :
~
Ensure that you are familiar with the Lockout Code Menu and its
associated submenu. In Chapter 4, refer to the "
section on page 136.
On the Lockout Code Menu , select the type of lockout code you wish to use —
once the panel is unlocked: Default or Custom .
If Custom is selected, use the Change Lockout Code Menu to enter the desired
code. Make a note of the selected code.
To lock the Controller, press and hold the PAGE button (in the Presets Section ),
then press the ALL button (in the Destination/Aux Bus ). The message
" KEYBOARD LOCKED " appears on the menu.
Press and hold the PAGE button, then press the ALL button. The Enter Lockout
Code menu appears.
Use the eight numbered buttons on the Source Selection Bus to enter the code.
~
If the correct code has been entered, the message "
Controller " appears on the display, and the Controller is ready for use.
~
If the incorrect code has been entered, the Controller remains locked.
Important If you have selected a Custom lockout code, but you have
forgotten the code, a Master Code is available. Refer to the
ScreenPRO-II Controller system's most current
" Whatsnew_ScreenPRO-II Controller.txt " document for
details. This document is bundled with every software
download. Note that the Master Code changes with each
software version.
Lockout Code Menu
Unlocking
ScreenPRO-II Controller • User's Guide
"