Barco ScreenPRO-II User Manual page 112

4. Menu Orientation
System Menu
pçÑíï~êÉ=sÉêëáçå=jÉåì
From the System Menu , press
B
A
C
K
Figure 4-19. Software Version Menu (sample)
The Software Version Menu displays the software versions for the ScreenPRO-II
Controller, all connected ScreenPRO-IIs, and BlendPRO-II. The following functions are
provided:
•
•
•
•
•
•
112
{
SW VER
SOFTWARE VERSION
Controller
BlendPRO-II
SP 1: 1.00
SP 3: 1.00
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
All software versions match!
DOWNLOAD
CODE
Controller — displays the Controller's software version.
BlendPRO-II — displays BlendPRO-II's software version.
SP — these lines display each ScreenPRO-II's software version. One line is
shown for each active destination.
In the lower portion of the menu, the system actively compares all software
versions to that of the Controller:
~
If all software versions match the Controller's version, the display
indicates " All Software version(s) match! "
~
If a mismatch is present, the display indicates " Software version
mismatch! ."
Press { DOWNLOAD CODE } to begin the software download process,
downloading code from the Controller to only those "mismatched" units. The
entire process takes several minutes to complete.
Press { FORCE DOWNLOAD } to download code to all connected devices,
typically for troubleshooting purposes, or to simply guarantee identical code in
your entire system. This process also takes several minutes to complete.
Note The two "download" softkeys are always present on this
menu, even when all code versions match.
}
to display the Software Version Menu .
1.00
1.00
SP 2: 1.00
SP 4: 1.00
FORCE
DOWNLOAD
ScreenPRO-II Controller • User's Guide
N
A
V
A
D
J