Barco ScreenPRO-II User Manual page 208

5. System Setup
Input Setup
11. Repeat from step 5 for the next source that you want to set up.
12. When all sources have been set up for this destination, press
13. Press
14. If required, repeat the entire procedure from step 1 for other destinations.
208
• Press { BACK } to return to the Input Menu .
c. If a Composite , S-Video or YP
• Scroll to the Saturation line and adjust as required.
• Scroll to the Hue line and adjust as required.
• Press { SAVE } to save the input configuration.
• Press { BACK } to return to the Input Menu .
the Home Menu .
{ }
SAVE to save the new system configuration in memory.
Important You do not have to repeat the input setup procedure for your
other destinations if either of the following criteria are met:
•
•
In this case, all other system destinations will automatically
receive input configuration files via the system's "copy down"
functionality.
You do have to repeat the input setup procedure if either of
the following criteria are met:
•
•
P source was selected:
b r
Your other destinations use sources that are patched
to the same router.
Your other destinations are configured using the " ALL
SP " function on the Input Source Patch Menu .
Your other destinations use a different router.
Your other destinations use unique input patching.
ScreenPRO-II Controller • User's Guide
{ }
HOME to return to