Barco ScreenPRO-II User Manual page 224

6. Operations
Working with Destinations
Following are several simple examples of source-to-destination routing:
224
Single source to single destination
Route Source 1 to Destination 1 :
a. Turn DEST AUX off.
b. Press Destination 1 .
c. Press LAYER A .
d. Select Source 1 .
e. Press AUTO TRANS .
Single source to single Aux destination
Route Source 2 to Aux Destination 2 :
a. Turn DEST AUX on.
b. Press Destination 2 .
c. Select Source 1 .
d. Press AUTO TRANS .
Single source to multiple destinations
Route Source 8 to Destinations 1 , 2 and 3 :
a. Turn DEST AUX off.
b. Press Destinations 1 , 2 and 3 simultaneously.
c. Press LAYER A .
d. Select Source 8 .
e. Press AUTO TRANS .
Multiple sources to multiple standard destinations
Route Source 2 to Destination 1 , and Source 3 to Destination 2 :
Turn DEST AUX off.
a.
b. Press Destination 1 .
c. Press LAYER A .
d. Select Source 2 .
e. Press Destination 2 .
f. Press LAYER A .
g. Select Source 3 .
h. Press Destinations 1 and 2 simultaneously.
i. Press AUTO TRANS .
Single source to multiple Aux and standard destinations
Route Source 3 to Destinations 1 and 2 , and Aux Destinations 1 and 2 :
a. Turn DEST AUX off.
b. Press Destinations 1 and 2 simultaneously.
c. Press LAYER A .
d. Turn DEST AUX on.
e. Press Destinations 1 and 2 simultaneously.
ScreenPRO-II Controller • User's Guide