Logo Menu - Barco ScreenPRO-II User Manual

4. Menu Orientation

LOGO Menu

ildl=jÉåì
The figure below illustrates a sample LOGO Menu :
H
O
M
E
Figure 4-76. LOGO Menu (sample)
The LOGO Menu enables you to select the full screen source for the panel's LOGO button.
You can choose between the three internal frame stores ( FG_1 , FG_2 or FG_3 ), or black.
Because the LOGO is the highest priority layer and downstream of all other effects, the
"black" source can serve as a convenient way to fade all effects to black — without
changing any of the image setups underneath the LOGO .
To access the menu:
•
The following LOGO Menu functions are provided:
•
•
Once you have reviewed all of the sections in this chapter, please continue with Chapter 5,
" System Setup
182
LOGO
Destination
ID
Type
Temp FG1 Info:
File Name
Resolution
Note On factory reset, "black" is the default LOGO source. If you
capture a frame and assign it as the LOGO source, that
frame will be the default upon power up.
Press the LOGO button in the Layer Control Section .
Type — enables you to select still frames FG_1, FG_2, FG_3 or Black as the
LOGO source. Use the Frame Grab Menu to capture frames. Refer to the
" Frame Grab Menu " section on page 142 for details.
In the Temp FG Info section:
~
File Name — displays the selected still frame's temporary storage
register.
~
Resolution — displays the resolution of the selected still frame.
" on page 183.
[ 1 ]
N
A
ALL
V
FG_1
[ FG1_T ]
A
[ 1024 x 768 ]
D
J
ScreenPRO-II Controller • User's Guide