Lag Port Setting - Planet WGS-4215-T User Manual

The page includes the following fields:
Object
•
LAG
• Name
• Type
• Link State
•
Active Member
• Standby Member
•
Modify
PoE Ports of WGS-804HPT will not be a LAG group.

4.4.3 LAG Port Setting

This page allows setting configuration for each LAG. The LAG Port setting screens in
The page includes the following fields:
Object
•
LAG Select
• Enable
• Speed
Description
The LAG for the settings contained in the same row
Display the current name
Display the current type
Display the link state
Display the active member
Display the standby member
Click to modify LAG configuration
Figure 4-4-6 LAG Port Setting Information Page Screenshot
Description
Select LAG number from this drop-down list.
Indicates the LAG state operation. Possible states are:
Enabled - Start up the LAG manually.
Disabled – Shut down the LAG manually.
Select any available link speed for the given switch port. Draw the menu bar to
select the mode.
Auto – Set up Auto negotiation.

Auto-10M – Set up 10M Auto negotiation.

User's Manual of WGS Managed Series
Figure 4-4-6
117
& Figure 4-4-7 appear.