Lag Port Setting - Planet IGS-4215-16T2S User Manual

The page includes the following fields:
Object
•
LAG
• Name
• Type
• Link State
•
Active Member
• Standby Member
•
Modify

4.4.3 LAG Port Setting

This page allows setting configuration for each LAG. The LAG Port setting screens in
The page includes the following fields:
Object
•
LAG Select
• Enable
• Speed
Description
The LAG for the settings contained in the same row.
Displays the current name.
Displays the current type.
Displays the link state.
Displays the active member.
Displays the standby member.
Click to modify LAG configuration.
Figure 4-4-6: LAG Port Setting Information Page Screenshot
Description
Select LAG number for this drop-down list.
Indicates the LAG state operation. Possible states are:
Enabled - Start up the LAG manually.
Disabled – Shut down the LAG manually.
Select any available link speed for the given switch port. Draw the menu bar to
select the mode.

Auto – Set up Auto negotiation.

Auto-10M – Set up 10M Auto negotiation.

Auto-100M – Set up 100M Auto negotiation.

Auto-1000M - Set up 1000M Auto negotiation.

Auto-10/100M – Set up 10/100M Auto negotiation.

10M – Set up 10M Force mode.

100M – Set up 100M Force mode.

1000M – Set up 1000M Force mode.
User's Manual of IGS-4215-16T2S
Figure 4-4-6
116
and Figure 4-4-7 appear.