Chapter 16 Compound Authentication Command List - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Chapter 16 Compound Authentication
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Only)
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Only)
config authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>] [add | delete]
ports [<portlist> | all]
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid
<vid_list> state [enable | disable]}] | multi_authen_methods [none | any | dot1x_impb |
impb_jwac | impb_wac | mac_impb| mac_jwac]}(1)
config authentication mac_format {case [lowercase | uppercase] | delimiter {[hyphen | colon |
dot | none] | number [1 | 2 | 5]}(1)}(1)
show authentication guest_vlan
show authentication ports {<portlist>}
enable authorization attributes
disable authorization attributes
show authorization
config authentication server failover [local | permit | block]
show authentication
show authentication mac_format
16-1 create authentication guest_vlan (EI Mode Only)
Description
This command is used to assign a static VLAN to be guest VLAN. The specific VLAN which
assigned to guest VLAN must be existed. The specific VLAN which assigned to guest VLAN can't
be deleted.
Format
create authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan - Specify the guest VLAN by VLAN name.
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
vlanid - Specify the guest VLAN by VLAN ID.
<vlanid 1-4094> - Enter the VLAN ID here. This ID must be between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To assign a static VLAN to be guest VLAN:
Command List
(EI Mode Only)
(EI Mode Only)
165
(EI Mode
(EI Mode