Ssh; Stateful Srp Switchover (High Availability) - Juniper JUNOSE SOFTWARE 10.2.2 - RELEASE NOTES 6-4-2010 Release Note

Trap Name
junidApsEventSwitchover
junidApsEventModeMismatch
junidApsEventChannelMismatch
junidApsEventPSBF
junidApsEventFEPLF
juniAddressPoolHighAddrUtil
juniAddressPoolAbatedAddrUtil
juniAddressPoolNoAddresses
juniDhcpLocalServerPoolHighAddrUtil
juniDhcpLocalServerPoolAbatedAddrUtil
juniDhcpLocalServerPoolNoAddresses
pimNeighborLoss

SSH

Stateful SRP Switchover (High Availability)

The SNMPv1-formatted versions of the following Juniper Networks traps
incorrectly contain ...x.y.z.0 in the SNMPv1-Trap-PDU enterprise field. That is, a
zero is mistakenly appended to the correct enterprise OID value.
Expected Enterprise OID
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.3.61.1
Work-around: Use the OIDs that the SNMP agent sends.
If the SRP module restarts when SSH is configured in a VR other than default,
SSH can sometimes become disabled. This happens if SSH attempts to bind
with a VR before the VR comes back up after the restart. In this event, a
warning message is generated to alert you to the fact that SSH is disabled in
that VR. You must manually re-enable SSH either by accessing the console VTY
or creating a Telnet session to the router.
Additional processing is required to maintain and mirror the necessary state
information that enables subscriber sessions to stay up across an SRP failover.
As a result, the performance of other control plane functions is reduced.
Specifically, call setup rates are lower than in previous releases.
Rapid call setup rates are most important following an outage that causes all
NOTE:
subscribers to drop, because many of the dropped subscribers will immediately
attempt to reconnect. This type of outage occurs far less frequently with stateful
SRP switchover.
We have ongoing development activities to characterize and improve call setup
rates in future releases.
Enterprise OID Sent by SNMP Agent
.1.3.6.1.4.1.4874.3.2.2.1.2.0
.1.3.6.1.4.1.4874.3.2.2.1.2.0
.1.3.6.1.4.1.4874.3.2.2.1.2.0
.1.3.6.1.4.1.4874.3.2.2.1.2.0
.1.3.6.1.4.1.4874.3.2.2.1.2.0
.1.3.6.1.4.1.4874.2.2.21.3.0
.1.3.6.1.4.1.4874.2.2.21.3.0
.1.3.6.1.4.1.4874.2.2.21.3.0
.1.3.6.1.4.1.4874.2.2.22.3.0
.1.3.6.1.4.1.4874.2.2.22.3.0
.1.3.6.1.4.1.4874.2.2.22.3.0
.1.3.6.1.3.61.1.0
Known Behavior
Release 10.2.2
31