Changing Publisher To Subscriber; Configuring Trace Settings - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Changing Publisher to Subscriber

Changing Publisher to Subscriber
Note
Step 1
Step 2
Step 3
Step 4

Configuring Trace Settings

Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
9-8
Use the Tracing page to activate and deactivate logging.
For more information on Trace Configuration, see the
Cisco Customer Response Solutions Servicing and Troubleshooting Guide.
Procedure
Access the Datastore Control Center by selecting Systems > Datastore Control
from the CRS Administration menu bar.
The Datastore Control Center page appears.
Select each datastore on the left pane and then click Publisher Activation.
The Publisher Activation page appears.
Select the required server (for the subscriber to be changed) by clicking on the
check box next to the server
Click Activate Publisher.
A warning message window appears.
To proceed with the change, click OK.
Repeat Step 3 and Step 4
When you activate the new publisher, the old publisher automatically becomes the
subscriber datastore.
You configure Trace settings by component:
CRS Administration—Trace File Configuration and Trace Configuration
•
settings.
CRS Engine— Trace File Configuration and Trace Configuration settings.
•
Chapter 9
for each datastore component that requires this change.
Managing the Cisco CRS Datastores