Adding A New Data Source; The Http Menu Option; Http Configuration - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Chapter 15 The Subsystems Menu

Adding a New Data Source

The HTTP Menu Option

HTTP Configuration

To modify an existing data source, click any hyperlink within the data source
summary table entry; the Enterprise Database Subsystem Configuration page
opens.
To add a new data source, click the Add a New Data Source hyperlink.
To add a new data source, click the Add New Data Source hyperlink on the
Enterprise Database Subsystem Configuration summary web page to access the
Enterprise Database Subsystem Configuration web page.
Related Topic
Provisioning the Database Subsystem, page 5-12
The Cisco CRS system uses the HTTP subsystem of the CRS Engine to add
components to the CRS Engine that allow applications to be triggered in response
to requests from a variety of web clients, including computers and IP phones.
Use the HTTP Trigger Configuration web pages to display, add, modify, and
delete existing HTTP triggers.
Select Subsystems > HTTP from the CRS Administration menu bar to access the
HTTP Trigger Configuration summary web page.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
The HTTP Menu Option
15-17