Managing The Cisco Crs System - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Managing the Cisco CRS System

Cisco CRS administration provides options to configure, control, and monitor
CRS component activities and information across a cluster.
Refer to the Cisco CRS Installation Guide for instructions about tasks that
significantly change your CRS deployment, such as:
• Changing from a single-server deployment to a multiple-server deployment.
Removing a Cisco CRS Software component from a server.
•
Moving a Cisco CRS Software component to another server.
•
• Adding, removing, or replacing a server to a Cisco CRS cluster.
The following sections describe the day-to-day management of CRS components.
• Control Center Terminology, page 8-2
About Control Center Management, page 8-3
•
High Availability and Automatic Failover, page 8-6
•
• Managing the Control Center, page 8-7
Managing the Cisco CRS Engine, page 8-18
•
Managing CRS LDAP Server Information, page 8-20
•
• Managing System Parameters, page 8-32
Exiting the CRS Administration, page 8-37
•
• Tracing Configuration, page 8-37
Cisco CRS Utilities, page 8-38
•
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
C H A P T E R
8
8-1