Specify Custom Classpath Entries - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Managing Custom Files

Specify Custom Classpath Entries

Step 1
Step 2
Step 3
Step 4
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
7-16
Chapter 7
• Display the order of custom steps.
Making custom subsystems or steps available to applications involves several
steps:
Creating a class that implements the WFSubsystem interface.
1.
Uploading the class/jars to default/classpath folder using the Document
2.
Management web page.
Use the Custom File Configuration web pages to select the jars/folders which
3.
contain the classes, specify a subsystem and start-up order.
Restart the Cisco CRS Engine.
4.
Subsystems will be visible under Subsystem Managers in the Control Center and
the custom steps will be visible in CRS Editor.
Use these Custom Classes/Steps/Subsystems Configuration web pages to specify
the available classpath entries.
Procedure
From the CRS Administration menu bar, select System > Custom File
Configuration.
The Custom File Configuration web page opens.
On the navigation bar, click one of the following:
Classpath for Custom Classes hyperlink to access the Custom Classes
•
Configuration area.
Classpath for Custom Steps hyperlink to access the Custom Steps
•
Configuration area.
Classpath for Custom Subsystems hyperlink to access the Custom
•
Subsystems Configuration area.
Use the arrow keys to move items between the Available Classpath Entries and
Selected Classpath Entries lists.
Click Update when your selections are complete.
Managing Prompts, Grammars, Documents, and Custom Files