The Meta-Inf Directory Attributes - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Managing AAR Files

The META-INF Directory Attributes

The application Subdirectory Attributes
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
7-28
Chapter 7
Manifest-Version: 1.0
Created-By: 1.2 (Sun Microsystems Inc.)
Name: Prompts/en_US/
Sealed: true
Name: Prompts/en_US/AA/
Sealed: false
The per-entry attributes fall into the following groups:
Attributes defined for file contents: Content-Type
•
This attribute specifies the MIME type and subtype of data for a specific file
entry in the AAR file. The value should be a string in the form of
type/subtype. For example, image/bmp is an image type with a subtype of
bmp (representing bitmap). This indicates the file entry as an image with the
data stored as a bitmap. RFC 1521 and 1522 discuss and define the MIME
types definition.
Attributes defined for directory versioning and sealing information:
•
These are the same set as the main attributes defined in the table listed under
the Attributes defined for extension and directory versioning and sealing
information. When used as per-entry attributes, these attributes overwrite the
main attributes for the individual file specified by the manifest entry.
The Cisco CRS platform recognizes the x.MF file in the applications, subsystems,
and steps subdirectories in the META-INF directory and interprets each to
configure applications, subsystems, and steps respectively. The x is the base file
name as listed on the Application-List main attribute of the manifest file. The
X.MF file contains one section defining the configuration of a particular
application.
The following table describes the syntax of the manifest file for the application
subdirectory.
Name
application-file
version-info
Managing Prompts, Grammars, Documents, and Custom Files
Value
version-info newline *application-attribute
Application-Version: version-number