Refreshing Account Sync Status - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Chapter 8 Managing the Cisco CRS System
Synchronizing the Cisco Historical Reports User password
Note
Step 1
Step 2
Step 3

Refreshing Account Sync Status

Step 1
During CRS installation, a pre-determined password phrase is set for
CiscoHistRrptUsr. If this password is ever changed on any node, you can
synchronize it to the pre-determined password.
To synchronize a password, complete the following steps.
You cannot change a CiscoHistRrptUsr password, only synchronize it.
Procedure
In the CRS Admin Utility, use the check box to select the CRSHistRrptUsr
account.
Select Option > Synchronize.
A warning dialog box appears.
Click OK.
The password is applied to each node in the cluster where the CRSHistRrptUsr
account is out-of-sync; a dialog box reports the status of the changes.
The Refresh Menu option refreshes each node's account sync status with cluster
level information, whether they are in-sync or out-of-sync.
Procedure
In the CRS Admin Utility, select View > Refresh.
CRS refreshes the node's account sync status with cluster information.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Cisco CRS Utilities
8-43