Configuring Alarm Settings - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Chapter 9 Managing the Cisco CRS Datastores

Configuring Alarm Settings

Note
Step 1
Field Description
Catalog Catalog of alarm message names.
Alarm Name Alarm message name for which you want to locate a stored alarm file.
Step 2
Caution
Step 3
Use the Alarm Configuration page configure system-wide settings to define the
Alarm Server.
Alarm Server Configuration is available for the following CRS components:
CRS Administration, CRS Engine, and CRS Cluster View Daemon.
Procedure
From any Datastore Control Center web page, click the Alarm Configuration
hyperlink.
The Alarm Configuration page appears for that datastore component. The
following fields are displayed on the Alarm Definitions web page.
Perform one of the following actions for the required server.
To activate logging, select the Logging checkbox next to its node ID.
•
To deactivate logging, deselect the Logging checkbox next to its node ID.
•
You should activate logging only for the purpose of debugging and remember to
deactivate logging once the debugging session is complete. When Logging is
activated, debug logs are be written to \wfavvid\log\ReplLogs, SQL Server logs,
and the NT Event viewer.
Click Update.
Related Topics
• The Alarm Configuration Menu Option, page 13-8
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Configuring Alarm Settings
9-11