Cisco CRS-1 - Carrier Routing System Router Administration Manual page 67

Chapter 3 Provisioning Telephony and Media
The JTAPI Configuration web page opens, displaying the JTAP Call Control
Group summary web page.
Note
Click the Add a New JTAPI Call Control Groups hyperlink.
Step 2
One of the following happens:
Step 3 Use this web page to specify the following information:
Page Area Field Name
Group Group ID
Information
Description
Number of CTI Ports
For a complete description of all columns, icons, and buttons on this page,
see JTAPI Call Control Group Configuration
Subsystems Menu."
If either the Unified CM credentials stored in LDAP are invalid or not stored
•
in the Unified CM LDAP, the Unified CM login page appears.
Enter your Unified CM Login User ID and Password and click Logon.
–
The JTAPI Call Control Group Configuration web page opens.
•
Description
Corresponds to the trunk group number reported to Cisco
ICME when the CRS server is part of the Enterprise solution.
Accept the automatic Group ID or enter a unique value.
Press the Tab key to automatically populate the Description
field.
Number of CTI Ports assigned to the group.
Note
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
If this field is set to <n>, then the system will
create<n> ports for each CRS Engine node (node in
which CRS Engine component is enabled).
Provisioning the JTAPI Subsystem
in Chapter 15, "The
3-9