Accessing The Crs Administration Web Interface - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Accessing the CRS Administration Web Interface

Accessing the CRS Administration Web Interface
Step 1
Step 2
Step 3
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
2-2
The web pages of the CRS Administration web interface allow you to configure
and manage the CRS system and its subsystems.
To connect to the CRS Administration web interface, complete the following
steps.
Procedure
Open the CRS Administration Authentication page by performing one of the
following actions:
From any server in the cluster on which you have installed Cisco CRS, choose
•
Start > Programs > Cisco CRS Administrator >
Application Administrator.
• From a web browser on any computer on your network, enter the following
URL:
http://servername/AppAdmin
In this example, replace <servername> with the host name or IP address of
the required CRS server.
Note If you are using Microsoft Internet Explorer Version 7.0, verify that
the popup blocker is disabled.
On the Authentication page, specify your Cisco CRS User Identification and
Password.
Note If you are accessing Cisco CRS for the first time, enter
the User Identification field, enter
the Cisco CRS Installation Guide for further instructions.
Click Log On.
Chapter 2 Introducing the CRS Administration Web Interface
ciscocisco
Administrator
in the Password field; see
in