Cisco CRS-1 - Carrier Routing System Router Administration Manual page 261

Chapter 8 Managing the Cisco CRS System
Step 3
Step 4
Synchronizing the CRS Administrator Password
Note
Step 1
Step 2
Step 3
Use the dialog box fields to specify and confirm a new password and click OK.
A warning dialog box appears.
Click OK.
The password is applied to each node in the cluster and the accounts running
under CRSAdministrator account on all nodes; a dialog box reports the status of
the changes.
If one or more nodes in the cluster has a CRS Administrator password that is
different than the cluster-level password, instead of setting a new password for the
cluster, you can resynchronize the passwords.
A red CRSAdministrator icon indicates that the password is out of sync.
To synchronize a CRSAdministrator password, complete the following steps.
Procedure
In the CRS Admin Utility, use the checkbox to select the CRSAdminstrator
account.
Select Option > Synchronize.
A warning dialog box appears.
Click OK.
The password is applied to each node in the cluster where the CRSAdministrator
account is out-of-sync; a dialog box reports the status of the changes.
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Cisco CRS Utilities
8-41