Cisco CRS-1 - Carrier Routing System Router Administration Manual page 83

Chapter 3 Provisioning Telephony and Media
Procedure
Step 1 From the CRS Administration menu bar, choose Subsystem > MRCP ASR.
The MRCP ASR Configuration summary web page opens, displaying the MRCP
Providers area.
Step 2 Click the MRCP ASR Servers hyperlink.
The MRCP ASR Server List web page opens.
Note
Step 3 Click the Add MRCP ASR Server hyperlink.
The MRCP ASR Server Configuration web page opens.
Step 4 Use this web page to specify the following:
Field Name
Server Name
Port Number
Provider Name
Locales
For a complete description of all columns, icons, and buttons on this page,
see Chapter 15, "The Subsystems Menu."
Description
Host name or IP address of the server the MRCP
ASR server software is installed on.
TCP port number used to connect to the MRCP
Server.
Valid options are:
•
•
Select the name of the MRCP ASR Provider this
server is associated with from the drop down list.
Languages supported by the ASR Provider. Select a
language (or multiple languages) from the
drop-down list and click Add Language; the
selected language appears in the Enabled Language
list.
Note
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Provisioning ASR and TTS in Cisco CRS
ScanSoft Server - 4900
Nuance Server - 554
Use the check box to disable/enable a
language.
3-25