Installing Client-Side Historical Reporting; Using The Crs User Options Web Interface; Accessing The Cisco Crs User Options Web Page - Cisco CRS-1 - Carrier Routing System Router Administration Manual

Using the CRS User Options Web Interface

Installing Client-Side Historical Reporting

Step 1
Step 2
Using the CRS User Options Web Interface

Accessing the Cisco CRS User Options Web page

Step 1
Step 2
Step 3
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
12-4
Chapter 12
To install client-side Historical Reporting, perform the following steps:
Procedure
From the CRS Supervision web page, click the Cisco CRS Historical Reporting
hyperlink.
For more instructions, see the Cisco CRS Historical Reports User Guide.
Use the CRS User Options web page to perform:
• Unified CCX downloads
Alternate pronunciations for call by name
•
Access the Unified CM User Page
•
To access the Cisco CRS User Options web page, perform the following steps:
Procedure
From the CRS Administration enter http://<CRS IP Address>/Appuser.
If prompted to do so, enter your User ID and Password.
The CRS User Option web page appears.
When finished, click Return to main page.
Using the Cisco CRS Supervisor and Cisco CRS User Options Plug-Ins