Nortel IP Audio Conference Phone 2033
Page 325 of 430
5
The middle port of the PIM (see Figure 64 on
page
324) has an attached
CAT5 Ethernet cable. Thread the cord through the channel on the bottom
of the IP Phone and plug it into the PIM port on the IP Phone. See
Figure 65 on
page
326.
Note: Red LEDs indicate power. Messages indicating system start up,
such as Loading, Initializing network, and Loading boot parameters
appear after a short delay.
Figure 65 on
page 326
shows the bottom view of the IP Audio Conference
Phone 2033.
IP Phones
Description, Installation, and Operation