Nortel 2001 Installation And Operation Manual page 299

Nortel WLAN Handset 2210 and WLAN Handset 2211
Table 36
WLAN Handset components and functions
Component
Power On/Start Call
Power Off/End Call
Menu
Line
Function
Soft keys
Function
Use the Power On/Start Call key to turn on
your WLAN Handset 2210. This key also
affects some of the states of the handset.
Use the Power Off/End Call key to terminate
an active call and turn off the handset.
Press the Menu key to view the full description
of the soft key abbreviations and access the
handset features. Press and hold Power On/
Start Call. Two chirps sound.The Menu key
displays a list of features. Select these
features by pressing the number key
corresponding to the feature or by using the
Up, Down, and Select buttons.
Use the Line key to access the feature keys
menu. Select these features by pressing the
number key associated with each feature.
The Line key accesses the same six feature
keys located at the top of an IP Phone 2004
display area.
Use the Function key to access the handset
functions when in the active (idle) state (see
Table 3 on page 21).
The Function key also provides access to the
User Option menu in the standby state.
Soft keys (self-labeled) are located below the
display area. The LCD label above the key
changes, based on the state of the handset.
Use the four soft keys (A, B, C, D) to activate
the displayed soft key feature.
IP Phones Description, Installation, and Operation
Page 299 of 430