Nortel 2001 Installation And Operation Manual page 41

The IP Phone 2001 password, node ID and TN must be entered manually
from the key pad.
For more information about DHCP servers, see Converging the Data
Network with VoIP (553-3001-160).
Go to Procedure 3, "Installing an IP Phone 2001 for the first time using
DHCP" on page 47.
Dynamic IP address assignment — Full DHCP
For a full DHCP installation, all parameters (IP Phone IP address, subnet
mask, default Gateway, Connect Server IP address, port number, action, and
retry count) are retrieved from the DHCP server to recognize the IP Phone
2001.
The IP Phone 2001 password, node ID, and TN must be entered manually
from the key pad.
For more information on how to set up DHCP servers for use with the
IP Phones, refer to Converging the Data Network with VoIP (553-3001-160).
Go to Procedure 3, "Installing an IP Phone 2001 for the first time using
DHCP" on page 47.
Procedure 2
Installing an IP Phone 2001 for the first time using
manual configuration
1 Configure a virtual loop on the system using LD 97.
For more information, see Software Input/Output: Administration
(553-3001-311).
2 Configure the IP Phone 2001 on the system using LD 11.
For more information, see Software Input/Output: Administration
(553-3001-311).
3 Connect the IP Phone 2001 components:
a. Connect one end of the handset cord to the handset jack on the back
of the IP Phone identified with a handset icon.
b. Connect the other end of the handset cord to the handset.
Nortel IP Phone 2001
IP Phones Description, Installation, and Operation
Page 41 of 430