Dialpad Entry - Nortel 2001 Installation And Operation Manual

Appendix C: 802.1x Port-based network access control
5 Enter 0 to disable EAP.
6 Press the OK soft key to accept the change.
Note: Press the Cancel soft key at any time to exit the menu and discard
any changes.

Dialpad entry

The following rules apply when you enter text and special characters using
the dialpad.
• Press a key from 0 – 9 once to enter the corresponding number.
• Press a key from 2 – 9 repeatedly to cycle through the letters assigned to
that key, first in lower case and then in upper case.
For example, if you press the 5 key repeatedly, the following characters
are displayed, one at a time:
j -> k -> l -> J -> K -> L -> 5 ->
See Table 46 on
• The insertion point remains in the its current position as long as you
continue to press the same key.
• The entry is accepted if either a new key is pressed or if two seconds pass
with no entry. The insertion point moves one space to the right.
For example, to enter the word "Nortel", press the following key
sequence:
6 [2 second delay] 6 7 8 3 5
Note: Although special characters are not required, key 1 generates
commonly used special characters, such as the period (.), at symbol (@),
and underscore (_).
page 366 for character key mappings.
IP Phones Description, Installation, and Operation
Page 365 of 430