Nortel 2001 Installation And Operation Manual page 282

Page 282 of 430
553-3001-368 Standard 7.00
Nortel Mobile Voice Client 2050
For more information about the Hardware ID screen, see Table 33.
Table 33
Hardware ID screen
Selection
Hardware ID
Auto-create
Firmware Version
Dialing formats
Dialing Locations settings set the dialing rules to be applied to properly route
a call when an end user dials a number. The dialing rules establish prefixes to
access local and long-distance numbers using the location of the end user's
August 2005
Description
This box contains the MAC address for
the Ethernet hardware installed in your
device. MVC 2050 uses the MAC
address of the Ethernet hardware as its
hardware ID. You may have to change
this value if there is more than one MAC
address, or if the device is using an
extranet client that hides the true MAC
address. For example, the Nortel
Contivity Extranet Switch uses a single
MAC address for all clients. This might
cause connection problems with your
communication server.
This changes the MAC address that
appears in the Hardware ID box. If your
device has more than one MAC
address, tap the Auto-Create button to
cycle through the set of MAC addresses
on your computer. Auto-Create also
makes up random hardware IDs in case
the Ethernet hardware addresses are
not unique to the communication server.
Shows the build number of MVC 2050
installed on your device. This value is
the version number of the application
last reported by the server.