Nortel 2001 Installation And Operation Manual page 372

Page 372 of 430
553-3001-368 Standard 7.00
Appendix D: IP Phone diagnostic utilities
Procedure 57
Accessing the Network Diagnostic Tools
menu in Local mode
1 Double-click the Services key. The Local Main Menu, Network
Diagnostic Tools, appears.
2 Press Cancel to quit, or use the Navigation keys to scroll through the
menu and select one of the following:
• Ping
• TraceRoute
• Ethernet Statistics
• IP Network Statistics
• IP Set & DHCP Information
Procedure 58
Executing Ping
1 Select Ping from the Network Diagnostic Tools submenu.
2 Press the IP soft key and enter the IP address to Ping.
Tip: Use the dialpad to enter the IP address. The * key is used for dots
and the # key produces a space.
3 Press the Ping soft key. The results of the Ping appear on the display.
4 Use the Navigation keys to browse the data. See Figure 66 on
Tip: Press the Ping soft key again to stop the pinging.
5 Press one of the following soft keys:
• Reset — to clear the data
• Exit — to return to the Network Diagnostic Tools menu.
August 2005
End of Procedure
End of Procedure
page 383.