Page 402 of 430
553-3001-368
Standard 7.00
Appendix D: IP Phone diagnostic utilities
–
To change the setting, choose an entry in the drop-down list.
•
DATA VLAN
–
To change the setting, choose an entry in the drop-down list.
•
Duplex setting
–
To change the setting, choose an entry in the drop-down list.
4
Tap the arrow keys on the scroll bar to view all the data.
5
Tap the Apply & Reset soft key to save the changes.
6
Tap the Exit key to return to the main display.
Local Diagnostics
The Local Diagnostics menu contains the following menu items:
•
Network Diagnostic Tools
•
Ethernet Statistics
•
IP Network Statistics
•
IP Set&DHCP Information
Procedure 83
Using Network Diagnostic Tools
1
Tap the Tools icon.
2
Tap the Local Diagnostics menu entry.
3
Tap the Network Diagnostic Tools soft key.
The screen displays Ping, Tracert, and EXIT soft keys, presents a
pull-down list for IP addresses, and displays the Ping and Hop
parameters.
4
Scroll down through the IP addresses and tap an address.
5
The number of repetitions of the Ping command are shown in the top bar
of the screen. The default is 4.
To change the number of repetitions, tap on the number and enter a new
value using the USB keyboard.
August 2005
End of Procedure