Nortel 2001 Installation And Operation Manual page 119

b. If you select Partial DHCP, then you must enter the following
parameters:
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS? (0-No,1-Yes)
XAS IP:
VLAN? (0-No, 1-Ma, 2-Au)
Nortel IP Phone 2004
Description
The node IP address of the IP line
node.
This is a fixed value: 4100
This is a fixed value: 1
The number of times the IP Phone
2004 attempts to connect to the
server. Enter 10.
Same as S1 in most cases (see
note below)
Same as S1
Same as S1
Same as S1
Default 1 (for Yes).
Note: If there is no External
Application Server (XAS), enter 0
(for No). You will not be prompted
to enter the XAS IP address.
Enter the IP address of the XAS
server.
Default 0 (for No)
802.1Q VLAN remains off until
initialization continues.
For more information about VLAN
configuration, refer to Converging
the Data Network with VoIP
(553-3001-160).
IP Phones Description, Installation, and Operation
Page 119 of 430