Page 392 of 430
553-3001-368
Standard 7.00
Appendix D: IP Phone diagnostic utilities
Ethernet Statistics
Figure 75 illustrates the data displayed from the EtherStats submenu item.
Figure 75
Ethernet statistics data display screen
1.Link: UP/Down
2.Duplex:Full/Half
3.Speed: xxx (MB)
4.Auto Sense/Negotiate
Auto-Nego Capability: Y/N
Auto-Nego Completed: Y/N
5.VLANPriority:xxx
6.VLANID:xxxx
7.PktColl:xxxxxxxxxx
8.CRCErrors:xxxxxxxxxx
9.FrameErrors:xxxxxxxxxx
In Figure 75,
•
Duplex - duplex mode
•
Speed - network speed 10MB/100MB
•
Auto Sense/Negotiate = Auto Negotiate Protocol Received or Not (Y -
Yes, N - No)
•
VLANPriority = IP Phone VLAN priority
•
VLANID = IP Phone VLAN ID
•
PCollision = network packet collision peg counts
•
CRCErrors = network CRC errors peg counts
•
FrameErrors = network Framing errors peg counts
Note: In the IP Phone Configuration menu, Auto Negotiate mode is
the default setting for initial startup. If the telephone is connected to a
network that supports Auto Negotiate, it selects the best speed and
duplex mode available. For more information, see the appropriate IP
Phone section.
August 2005