Network Diagnostic Utilities Data Display Pages - Nortel 2001 Installation And Operation Manual

Page 382 of 430

Network Diagnostic Utilities data display pages

553-3001-368 Standard 7.00
Appendix D: IP Phone diagnostic utilities
Procedure 79
Browsing RUDP Statistics
1 Select RUDP Stats from the Diagnostics submenu. The RUDP statistics
appear on the display.
2 Do one of the following:
• Press the OK soft key to return to the Diagnostics submenu.
• Use the Navigation keys to scroll through the data display results.
See Figure 77 on
• Press the Cancel soft key to return to the Diagnostics submenu.
QoS Statistics
Use Procedure 80 to access the QoS Stats submenu item in Remote mode.
Procedure 80
Browsing Quality of Service Statistics
1 Select QoS Stats from the Diagnostics submenu. The Quality of Service
statistics appear on the display.
2 Do one of the following:
• Press the OK soft key to return to the Diagnostics submenu.
• Use the Navigation keys to scroll through the results. See Figure 78
on page 394.
• Press the Cancel soft key to return to the Diagnostics submenu.
Note: The IP Phone screen display returns to an idle state after 5 minutes
if the user does not interact with menu items.
Data from the diagnostic utilities is displayed on the IP Phone screen display.
One line of data at a time is displayed on IP Phone 2001, IP Audio Conference
Phone 2033, and IP Phone 2002 and 3 lines of data are displayed at a time on
August 2005
page 394.
End of Procedure
End of Procedure