Nortel 2001 Installation And Operation Manual page 102

Page 102 of 430
Cleaning the IP Phone display screen
Gently wipe the IP Phone display screen with a soft, dry cloth.
Programmable line (DN)/feature key label display
Soft key label display
553-3001-368 Standard 7.00
Nortel IP Phone 2004
CAUTION
Do not use any liquids or powders on the IP Phone.
Using anything other than a soft, dry cloth can
contaminate IP Phone components and cause premature
failure.
The feature key label area displays a ten-character string for each of the four
feature keys. Each feature key includes the key label and an icon. The icon
state can be on, off, or flashing. Key labels are left-aligned for keys on the left
side of the screen, and right-aligned for keys on the right side of the screen.
Note: If a label is longer than ten characters, the last ten characters are
displayed, and the excess characters are deleted from the beginning of the
string.
A maximum of ten functions can be assigned to the soft keys. Your system
administrator assigns functions to the soft keys in layers.
Use the More.. soft key to navigate through the layers of functions. If there
are only four functions assigned to the soft keys, the More.. key does not
appear and all four functions are displayed.
The soft key label has a maximum six characters. Each soft key includes the
soft key label and an icon. When a soft key is in use, a flashing icon displays
at the beginning of the soft key label, and the label shifts one character to the
right. (If the label is six characters long, the last or rightmost character is
truncated.) If a feature is enabled, the icon state turns to On. It remains in the
on state until the feature key is pressed again. This cancels the enabled feature
and turns the icon off, returning the soft key label to its original state.
August 2005