Nortel 2001 Installation And Operation Manual page 376

Page 376 of 430
553-3001-368 Standard 7.00
Appendix D: IP Phone diagnostic utilities
— If the destination IP address is in the list, press the Select soft
key to select the IP address. Press the Select soft key again to
return to the Ping submenu.
— If the destination IP address is not in the list, continue scrolling
through the available IP address list until the IP address 0.0.0.0
appears. Press the Select soft key.
Tip: To edit the IP address, use the keypad and the Delete soft key
and the Cancel soft key. Use the * key for dots.
4 Press the Select soft key to save the new IP address or press the Cancel
soft key to return to the Ping submenu.
Procedure 66
Changing the number of Pings
1 From the Ping submenu, use the Navigation keys to scroll to the Nr of
Pings submenu item.
2 Press the Select soft key.
Tip: Use the Delete and Clear soft keys to enter the number of pings.
3 Do one of the following:
• Press the Select soft key to accept the change and return to the Ping
submenu.
• Press the Cancel soft key to return to the Ping submenu.
Procedure 67
Pinging an IP address
1 From the Ping submenu, use the Navigation keys to scroll to the Ping!
submenu item.
2 Press the Select soft key. Pinging starts.
Tip: Press the Stop soft key to stop pinging.
3 Press the OK soft key to return to the Ping submenu.
August 2005
End of Procedure
End of Procedure