Nortel 2001 Installation And Operation Manual page 115

Data VLAN? (0-No, 1-Yes)
Duplex (0-Auto, 1-Full)
GARP Ignore? (0-No,1-Yes)
Note 1: The IP Phone 2004 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
The IP Phone 2004 searches for the connect server. When the
connection is complete, proceed with step 11.
Nortel IP Phone 2004
After the value is entered, the DATA
VLAN configuration option appears on
the display.
Enter 0 (for No)
Data VLAN is not present.
Enter 1 (for Yes)
Enter DATA VLAN to set the DATA
VLAN ID, then press OK.
The following DATA VLAN ID displays:
DATA VLAN ID: 1234
Note: The DATA VLAN ID is entered as
an integer. The DATA VLAN ID is a
12-bit value between 0 and 4095, and
should be different from the VOICE
VLAN ID.
The IP Phone 2004 is configured with
802.1Q enabled, the DATA VLAN ID is
configured to the entered value, and the
DATA VLAN priority = 0.
Default 0 (for Auto)
Default 0 (for No)
IP Phones Description, Installation, and Operation
Page 115 of 430