Nortel 2001 Installation And Operation Manual page 121

Data VLAN? (0 for No, 1 for Yes)
Duplex (0-Auto, 1-Full)
GARP Ignore? (0-No,1-Yes)
Note 1: The IP Phone 2004 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
The IP Phone 2004 searches for the connect server. When the
connection is complete, proceed to step 10.
Nortel IP Phone 2004
After the value is entered, the
DATA VLAN configuration option
appears on the display.
Enter 0 (for No)
Data VLAN is not present.
Enter 1 (for Yes)
Enter DATA VLAN to set the DATA
VLAN ID, then press OK.
The following DATA VLAN ID
displays:
DATA VLAN ID: 1234
Note: The DATA VLAN ID is
entered as an integer. The DATA
VLAN ID is a 12-bit value between
0 and 4095, and should be
different from the VOICE VLAN ID.
The IP Phone 2004 is configured
with 802.1Q enabled, the DATA
VLAN ID is configured to the
entered value, and the DATA
VLAN priority = 0.
Default 0 (for Auto)
Default 0 (for No)
IP Phones Description, Installation, and Operation
Page 121 of 430