Nortel 2001 Installation And Operation Manual page 333

Nortel IP Audio Conference Phone 2033
b. If you select Partial DHCP, then you must enter the following
parameters:
Screen prompt
S1 IP
S1 Port
S1 action
S1 retry
S2 IP
S2 Port
S2 action
S2 retry
Cfg XAS? (0-No,1-Yes)
VLAN? (0-No, 1-Ma, 2-Au)
Description
the node IP address of the IP line node
this is a fixed value: 4100
this is a fixed value: 1
the number of times the IP Audio
Conference Phone 2033 attempts to
connect to the server; enter 10
same as S1 in most cases (see note
below)
same as S1
same as S1
same as S1
Enter 0 (for No), since External
Application Server is not supported on
the IP Audio Conference Phone 2033.
This prompt exists to support future
implementation of External Application
Server.
Default 0 for No
802.1Q VLAN remains off and
initialization continues.
1-MA
Enter a VLAN ID manually, then press
OK.
The following VLAN ID displays:
Manual Cfg
VLAN: 1234
Note: The VLAN ID is entered as a
decimal. The VLAN ID is a 12-bit value
between 0 and 4095.
The IP Audio Conference Phone 2033 is
configured with 802.1Q VLAN enabled,
priority = 6, and the VLAN ID set to the
entered value.
IP Phones Description, Installation, and Operation
Page 333 of 430