Appendix D: IP Phone diagnostic utilities
Figure 68
Ethernet Statistics data display page
1.Link: UP/Down
2.Duplex:Full/Half
3.Speed: xxx (MB)
4.Auto Sense/Negotiate
Auto-Nego Capability:Y/N
Auto-Nego Completed:Y/N
5.VLANPriority:xxx
6.VLANID:xxxx
7.PktColl:xxxxxxxxxx
8.CRCErrors:xxxxxxxxxx
9.FrameErrors:xxxxxxxxxx
In Figure 68,
•
Duplex = duplex mode
•
Speed = network speed 10MB/100MB
•
Auto Sense/Negotiate = Auto Negotiate Protocol Received or Not
(Y – Yes, N – No)
Note: In the IP Phone Configuration menu, Auto Negotiate mode is
the default setting for initial startup. If the telephone is connected to a
network that supports Auto Negotiate, it selects the best speed and
duplex mode available. For more information, see the appropriate IP
Phone section.
•
VLANPriority = IP Phone VLAN priority
•
VLANID = IP Phone VLAN ID
•
PCollision = network packet collision peg counts
•
CRCErrors = network CRC errors peg counts
•
FrameErrors = network Framing errors peg counts
IP Phones
Description, Installation, and Operation
Page 385 of 430