Nortel 2001 Installation And Operation Manual page 291

Listener IP
Use the Listener IP screen to override the port assignments when there is a
conflicting application on the PDA.
See Table 35 for information about selections available on the Listener IP
screen.
Table 35
Listener IP screen
Selection
Use a specific address
Use a specific port
Macros
The Mobile Voice Client (MVC) 2050 Macros tab enables you to record and
use macros. A macro is a recorded sequence of steps that saves you
keystrokes.
For example, you can create a macro that selects a particular line and then
dials that telephone number automatically. Another example of macro use is
programming voicemail access numbers and codes for faster access.
Macro screen
To enter a new macro name, or to select an existing macro to modify or delete,
select the New icon to the right of the list box. See Figure 56 on
Nortel Mobile Voice Client 2050
Description
MVC 2050 normally listens to all
IP addresses on the device for
communication server-to-terminal
(UNIStim) messaging on all the
network interface cards on the
device. This is the default mode of
operation. To override this
behavior, select the check box
and enter a specific IP address.
MVC 2050 listens to IP port 5000
on the device for communication
server-to-terminal (UNIStim)
messaging.
IP Phones Description, Installation, and Operation
Page 291 of 430
page 292.