Nortel 2001 Installation And Operation Manual page 364

Page 364 of 430
553-3001-368 Standard 7.00
Appendix C: 802.1x Port-based network access control
10 Enter the Password.
• Enter text using the numeric keypad. See "Dialpad entry" on
page 365
When you enter a new password, the password is displayed in clear
text.
• Press the BkSpace soft key to delete a single character to the left of
the insertion point.
• Press the Clear soft key to delete the entire DeviceID entry and place
the insertion point at the beginning of the string.
11 Press the OK soft key to accept the password and exit the EAP menus.
Note: If the OK soft key is pressed before any changes are made, the
current password is saved.
Procedure 56
Disabling 802.1x supplicant
1 Reset the IP Phone by disconnecting and reconnecting power.
2 When the Nortel logo appears, press each of the soft keys in sequence.
For information on configuring the IP Phone 2001, see Procedure 2 on
page 41, "Installing an IP Phone 2001 for the first time using manual
configuration" on
For information on configuring the IP Phone 2002, see Procedure 10 on
page 75, "Installing an IP Phone 2002 for the first time using manual
configuration" on
For information on configuring the IP Phone 2004, see Procedure 18 on
page 110, "Installing an IP Phone 2004 for the first time using manual
configuration" on
For information on configuring the IP Audio Conference Phone 2033, see
Procedure 48 on
2033 for the first time using manual configuration" on
3 If no other configuration changes are required, press OK repeatedly until
the 802.1x Options menu appears.
4 Press the Select soft key.
August 2005
for information on entering text using the numeric keypad.
End of Procedure
page 41".
page 75".
page 110".
page 323, "Installing an IP Audio Conference Phone
page 323".