Nortel 2001 Installation And Operation Manual page 74

Page 74 of 430 Nortel IP Phone 2002
553-3001-368 Standard 7.00
Your system administrator provides the following information: IP address,
subnet mask, and the default Gateway.
You must also enter the Connect Server parameters including: IP address,
port number, action, and retry count.
Go to Procedure 10, "Installing an IP Phone 2002 for the first time using
manual configuration" on
Dynamic IP address assignment — Partial DHCP
For a partial DHCP installation, you must provide, through the IP Phone 2002
key pad, the Connect Server parameters including: IP address, port number,
action, and retry count. Other parameters (IP Phone IP address, subnet mask
and default Gateway) are retrieved from the DHCP server.
The IP Phone 2002 password, node ID and TN must be entered manually
from the key pad.
For more information about DHCP servers, see Converging the Data
Network with VoIP (553-3001-160).
Go to Procedure 11, "Installing an IP Phone 2002 for the first time using
DHCP" on page 80.
Dynamic IP address assignment — Full DHCP
For a full DHCP installation, all parameters (IP Phone IP address, subnet
mask, default Gateway, Connect Server IP address, port number, action, and
retry count) are retrieved from the DHCP server to recognize the IP Phone
2002.
The IP Phone 2002 password, node ID, and TN must be entered manually
from the key pad.
For more information on how to set up DHCP servers for use with the IP
Phones, refer to Converging the Data Network with VoIP (553-3001-160).
Go to Procedure 11, "Installing an IP Phone 2002 for the first time using
DHCP" on page 80.
August 2005
page 75.