Nortel 2001 Installation And Operation Manual page 330

Page 330 of 430
553-3001-368 Standard 7.00
Nortel IP Audio Conference Phone 2033
Note: The IP Audio Conference Phone 2033 can support a primary (S1)
and secondary (S2) connect server. If you require IP Phones to register
on multiple nodes, refer to IP Line: Description, Installation, and
Operation (553-3001-365).
The IP Audio Conference Phone 2033 searches for the connect server.
When the connection is complete, proceed with Step 10.
10 Enter the following information provided by your system administrator:
Screen prompt
Password
Node
TN
Note: Select the Shift soft key labeled (>>) and press Clear to edit the
TN field. The IP Audio Conference Phone 2033 by default will place you
in the units field of the TN. You can not use backspace to move to the
loop, shelf or card fields.
The IP Audio Conference Phone 2033 registers with the Terminal Proxy
Server (TPS) and, if needed, begins the firmware download. This takes
several minutes. When the firmware download is complete, the IP Audio
Conference Phone 2033 resets.
Note: The Enhanced UNIStim Firmware Download feature for IP Phones
provides an improved method of delivering new firmware to IP Phones.
For further information on Enhanced UNIStim Firmware Download, refer
to IP Line: Description, Installation, and Operation (553-3001-365).
The current system date and time appear on the top line of the display
when the configuration is complete. Self-labeling keys also appear.
11 Check for dial tone and the correct DN above the display.
12 (Optional) Customize the soft keys as required. For more information, see
Software Input/Output: Administration (553-3001-311) and IP Audio
Conference Phone 2033 User Guide.
August 2005
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been configured
in your system.
The node ID.
The TN or VTN.
.
End of Procedure