Nortel 2001 Installation And Operation Manual page 76

Page 76 of 430 Nortel IP Phone 2002
Figure 6
IP Phone 2002 Ethernet network interface connections
Network
Ethernet
PC
Ethernet
553-3001-368 Standard 7.00
5 Power the IP Phone 2002 using either the Power over Ethernet or an AC
power transformer (local power).
Timing information
There are only four seconds between plugging in the IP Phone 2002
power transformer and the appearance of the Nortel logo in the middle
of the display. When you see the logo, you have one second to respond
by pressing the four feature keys at the bottom of the display in
sequence from left to right. If you miss the one-second response time,
the IP Phone 2002 attempts to locate the connect server. Wait until it is
finished, and then begin the power-up sequence again.
To use local power, plug the AC power transformer into the nearest
power outlet.
August 2005
IMPORTANT!