Appendix D: IP Phone diagnostic utilities
•
Local Diagnostics
•
Touch Panel Setup
•
Contrast and Brightness
•
USB devices
•
TFTP Upgrade
•
Preferences
Note: Entering Text in the Tools menu items is easier with a USB
keyboard.
Network Configuration
The Network Configuration displays the information that was configured
when the IP Phone 2007 was installed.
Procedure 82
Displaying Network Configuration information
1
Tap the Tools icon.
2
Enter the Tools menu password (if password protection is enabled). For
information on password protection, refer to "Password Protection" on
page
141.
3
Tap the Network Configuration menu entry.
The screen displays Apply & Reset and Exit soft keys, and the
parameters used when configuring the IP Phone 2007:
•
DHCP status
–
To change the setting, choose an entry in the drop-down list.
•
Telephone Set IP address
•
Network Mask (NET MASK)
•
Gateway IP address
•
Server 1 IP address, Port, Action, Retry, and PK numbers
•
Server 2 IP address, Port, Action, Retry, and PK numbers
•
XAS (S4) IP address, Port, Action, Retry
•
Voice VLAN
IP Phones
Description, Installation, and Operation
Page 401 of 430