Supported Features - Nortel 2001 Installation And Operation Manual

Supported features

Table 10
IP Phone 2004 components and functions (Part 5 of 5)
Component
Handsfree key
Note 1: If a call is presented while the user is manipulating an option, the
IP Phone 2004 rings and the DN key flashes. However, the screen display
is not updated with Caller ID information. The programming text is not
disturbed.
Note 2: The user can originate a call using Autodial or Last Number
Redial while manipulating an option. However, the display is not updated
with the dialed digits or the Caller ID, and Autodial and Last Number
Redial intercept the dialpad.
The IP Phone 2004 supports the following additional features:
• 802.1Q VLAN and 802.1P priority support, industry standards for
managing bandwidth usage — full VLAN capability, including a
manageable integrated switch in the IP Phone for VLAN and priority
tagging for PC and IP Phone traffic
• 802.1x Port-based network access control, industry standard for passing
Extensible Authentication Protocol (EAP) over a LAN
• integrated hardware to support power over Ethernet, for IEEE 802.3af
standard power; also including support for PowerDsine Power over LAN
Hub powering, and Cisco proprietary powering as tested with specific
Cisco Ethernet switch equipment
• Extensible Authentication Protocol (EAP)
• Gratuitous Address Resolution Protocol Protection (GARP)
• VLAN filtering
• ability to change the feature key labels
Nortel IP Phone 2004
Function
Press the Handsfree key to activate
handsfree.
The LED lights to indicate when the handsfree
feature is active.
IP Phones Description, Installation, and Operation
Page 99 of 430