Using CLI Commands
IDU commands
Appendix D: IP Phone diagnostic utilities
8
Press the navigation keys to scroll through the NAT information.
Nortel recommends partial DHCP configuration for IP Phones residing
behind a NAT router unless the NAT router supports special
configuration of the DHCP server. For more information, refer to IP Line:
Description, Installation, and Operation (553-3001-365).
The system-based IDU command in LD 32 can be used to test the end-to-end
IP connectivity of the IP Phone from the call server console instead of using
set-based diagnostics.
The IDU command provides the following information:
•
TN
•
TN ID
•
MAC address
•
IP address
•
LTPS IP address
•
Manufacturer code
•
Model
•
NT code
•
Color code
•
Release code
•
Serial number
•
Firmware/Software version
IMPORTANT!
IP Phones
Description, Installation, and Operation
Page 397 of 430