Nortel 2001 Installation And Operation Manual page 86

Page 86 of 430 Nortel IP Phone 2002
553-3001-368 Standard 7.00
Data VLAN?
(0 for No, 1 for Yes)
Duplex (0-Auto, 1-Full)
GARP Ignore?(0-No,1-Yes)
Note 1: The IP Phone 2002 can support a primary (S1) and secondary
(S2) connect server. If you require IP Phones to register on multiple
nodes, refer to "Enhanced Redundancy for IP Line Nodes" in IP Line:
Description, Installation, and Operation (553-3001-365).
The IP Phone 2002 searches for the connect server. When the
connection is complete, proceed to step 10.
10 Enter the following information provided by your system administrator.
Screen prompt
Password
August 2005
After the value is entered, the DATA
VLAN configuration option appears on
the display.
Enter 0 (for No)
Data VLAN is not present.
Enter 1 (for Yes)
Enter DATA VLAN to set the DATA VLAN
ID, then press OK.
The following DATA VLAN ID displays:
DATA VLAN ID: 1234
Note: The DATA VLAN ID is entered as
an integer. The DATA VLAN ID is a 12-bit
value between 0 and 4095, and should
be different from the VOICE VLAN ID.
The IP Phone 2002 is configured with
802.1Q enabled, the DATA VLAN ID is
configured to the entered value, and the
DATA VLAN priority = 0.
Default 0 (for Auto)
Default 0 (for No)
Description
IP Phone Installer Password
You are not prompted to enter the IP Phone
Installer Password if it has not been
configured in your system.