Nortel 2001 Installation And Operation Manual page 152

Page 152 of 430
553-3001-368 Standard 7.00
Nortel IP Phone 2007
For more information, see Software Input/Output: Administration
(553-3001-311).
3 Connect the IP Phone 2007 components:
a. Connect one end of the handset cord to the handset jack on the back
of the IP Phone (identified with a handset icon).
b. Connect the other end of the handset cord to the handset.
4 Choose one of the following connections:
• For an IP Phone not sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN Ethernet
port located on the back of the IP Phone (identified with a LAN icon).
Plug the other end of the CAT5 Ethernet cable into the IP network.
• For an IP Phone sharing a LAN access with a PC:
Connect one end of the CAT5 Ethernet cable to the LAN Ethernet
port located on the back of the IP Phone (identified with a LAN icon,
see Figure 15 on
Insert one end of a second CAT5 Ethernet cable into the PC Ethernet
port located on the back of the IP Phone (identified with a PC icon,
see Figure 15 on
Ethernet port.
CAUTION
Damage to Equipment
Do not plug your IP Phone 2007 into any port but the
PC Ethernet port. Severe damage can result. Consult
your system administrator to ensure that you are
plugging your IP Phone into the PC Ethernet port.
August 2005
page 153) and the other end to the IP network.
page 153) and the other end into the computer's