Procedure 3
Installing an IP Phone 2001 for the first time
using DHCP
1
Configure a virtual loop on the system using LD 97.
For more information, see Software Input/Output: Administration
(553-3001-311).
2
Configure the IP Phone 2001 on the system using LD 11.
For more information, see Software Input/Output: Administration
(553-3001-311).
3
Connect the IP Phone 2001 components:
a.
Connect one end of the handset cord to the handset jack on the back
of the IP Phone identified with a handset icon.
b.
Connect the other end of the handset cord to the handset.
4
Connect one end of the CAT5 Ethernet cable to the network interface
located on the back of the IP Phone (identified with a LAN icon, see
Figure 3 on
page
into the IP network.
Nortel IP Phone 2001
42). The other end of the CAT5 Ethernet cable plugs
IP Phones
Description, Installation, and Operation
Page 47 of 430