Nortel 2001 Installation And Operation Manual page 154

Page 154 of 430
553-3001-368 Standard 7.00
Nortel IP Phone 2007
a. To use local power, plug the Global power adapter into the nearest
power outlet. Refer to Table 17 on
b. Connect the power jack as shown in Figure 15 on
You will hear a tone shortly before the IP Phone is ready to start the Nortel
IP telephone application.
6 Once the application has loaded and started, Nortel will appear in the
middle of the screen. Immediately press the following keys in sequence:
a. 0
b. 0
c. 7
d. star (*)
Note: If you miss part of the configuration, unplug the phone from the
power for a few seconds and redo this step.
7 At the prompt DHCP Yes/No?, select No.
8 Enter the following information provided by your system administrator:
Note: When entering the IP addresses and subnet mask, use the star (*)
key on the dialpad to represent the dot (.).
Screen prompt
set IP
net msk
def gw
August 2005
page 147.
Description
a valid IP Phone 2007 IP address
a subnet mask
the default Gateway for the IP Phone 2007
on the LAN segment to which it is connected
page 153.